Découpeuse de Profilés Décoratifs SPQ-TR
Obtenir un Devis RapideDécoupeuse de Profilés Décoratifs SPQ-TR — eps cutting lines by ChinaEps, CE certified.
La SPQ-TR est une découpeuse de profilés à fil chaud pour décoration de façades EIFS.
Spécifications Clés
Spécifications Techniques
| Paramètre | Valeur |
|---|---|
| Model | SPQ-TR Decorative Trim Cutting Machine |
| Cutting Type | Hot-wire profile cutting |
| Workpiece Length | Up to 2,500 mm |
| Workpiece Cross-Section | Up to 400 × 400 mm |
| Profile Library | Roman columns, cornices, baseboards, ceiling roses, window mouldings |
| Cutting Wire Diameter | 0.3-0.5 mm |
| Cutting Speed | 50-200 mm/min (contour-dependent) |
| Position Accuracy | ±0.3 mm |
| Voltage | 380V / 50Hz |
| Total Power | 4.5 kW |
| Machine Weight | 650 kg |
| Dimensions (L×W×H) | 3,200 × 1,200 × 1,800 mm |
* Les spécifications sont susceptibles d'être modifiées sans préavis. Contactez-nous pour les données techniques les plus récentes.
Ce que Cette Machine Résout
Trois problèmes de production éliminés par cette machine — avec des solutions ingénieriques et mesurables.
Architectural workshops need to produce Roman columns, cornices, and custom EIFS profiles — but standard CNC cutters can't do tight contours and continuous straight cutters can't do curves
SPQ-TR is a dedicated hot-wire profile cutter — bundled 50+ EIFS profile library + DXF import covers any 2D contour from a Roman column profile to a custom cornice.
Slow precision cutting (50-200 mm/min) sounds bad but is required — fast cuts on decorative profiles produce rough edges that need labor-intensive sanding
SPQ-TR's slow precision cutting produces glass-smooth edges direct from the machine — no secondary finishing required.
Custom architectural workshops can't justify USD 30,000+ for a full CNC line if they only need profile cutting
SPQ-TR at USD 8,000-12,000 is the right entry point — compact 3.2 × 1.2 m footprint fits in any architectural workshop.
Principe de Fonctionnement
SPQ-TR uses a single tensioned hot-wire that traces the profile path defined by the HMI recipe. Operator mounts the EPS workpiece, selects profile from library (or imports DXF), starts cycle. Machine cuts the profile contour while wire stays tensioned and at controlled temperature.
1. Workpiece Setup
Operator mounts EPS block on bench (manual or pneumatic clamping); recipes auto-calculate clearance.
2. Profile Selection
HMI displays 50+ bundled EIFS profiles (Roman column, cornice, baseboard, ceiling rose); operator selects or imports custom DXF.
3. Wire Heating
0.3-0.5mm nichrome wire heated to recipe temperature (typically 280-320°C); current monitored to detect breakage.
4. Precision Cutting
Wire traces the contour at 50-200 mm/min; X-Y servo drives maintain ±0.3mm position accuracy.
5. Product Removal
Operator removes finished profile; counter increments; workpiece advanced for next cut if continuous-feed mode.
Avantages de Performance Ingénieriques
Chaque avantage soutenu par des spécifications mesurables — pas d'allégations marketing sans données.
Pre-engineered EIFS profiles let operator start producing without CAD training.
Servo-driven X-Y rails replace operator skill — repeatable quality batch after batch.
Slow precision cutting eliminates downstream finishing labor.
Entry-level profile cutting at 1/3 the CAPEX.
Fits in any architectural workshop without warehouse-scale installation.
Applications de Production Réelles
Voyez où cette machine s'intègre dans des usines réelles.
Product FAQ
The questions buyers ask most often before placing an order.
Can SPQ-TR also cut SPQ-CNC type 3D shapes?
What DXF format support, and which CAD tools work?
Wire change frequency?
Ships to 220V/60Hz?
Build a Complete EPS Line
This machine integrates into the full ChinaEps production flow — upstream, downstream, and auxiliary equipment from one supplier.
Upstream — Bead Preparation
Downstream — Finishing & Packing
Pourquoi ChinaEps — Force Industrielle
Capacité de fabrication entièrement intégrée derrière chaque machine que nous expédions.
Certifications et Conformité
Engagement de Service
Au-delà de l'expédition — nous assumons la responsabilité de chaque machine livrée.
Garantie 5 Ans
Composants principaux garantis 5 ans ; pièces standard 12 mois.
Réponse à Distance sous 24 h
Les ingénieurs techniques répondent sous 24 heures par WhatsApp / e-mail / appel vidéo.
Service Mondial sur Site
Nos techniciens se déplacent dans le monde entier pour l'installation, la mise en service et la réparation.
Formation des Opérateurs
Formation pratique et documentation technique complète dans votre langue.
Aperçu ROI
Chiffres de référence rapides — pour un devis précis avec vos données d'usine, utilisez le Calculateur ROI.
Prêt à Construire Votre Ligne de Production EPS/EPP ?
Obtenez une solution clé en main personnalisée — tarifs compétitifs, technologie éprouvée et service après-vente complet de notre équipe d'ingénieurs.